This is the multi-page printable view of this section. Click here to print.
Upgrade your cluster smoothly to a newer version with this command
Upgrade your cluster smoothly to a newer version with this command
kubeadm upgrade [flags]
| -h, --help | |
help for upgrade |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Upgrade your Kubernetes cluster to the specified version
Upgrade your Kubernetes cluster to the specified version
kubeadm upgrade apply [version]
| --allow-experimental-upgrades | |
Show unstable versions of Kubernetes as an upgrade alternative and allow upgrading to an alpha/beta/release candidate versions of Kubernetes. |
|
| --allow-release-candidate-upgrades | |
Show release candidate versions of Kubernetes as an upgrade alternative and allow upgrading to a release candidate versions of Kubernetes. |
|
| --certificate-renewal Default: true | |
Perform the renewal of certificates used by component changed during upgrades. |
|
| --config string | |
Path to a kubeadm configuration file. |
|
| --dry-run | |
Do not change any state, just output what actions would be performed. |
|
| --etcd-upgrade Default: true | |
Perform the upgrade of etcd. |
|
| -f, --force | |
Force upgrading although some requirements might not be met. This also implies non-interactive mode. |
|
| -h, --help | |
help for apply |
|
| --ignore-preflight-errors strings | |
A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| --patches string | |
Path to a directory that contains files named "target[suffix][+patchtype].extension". For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd", "kubeletconfiguration", "corednsdeployment". "patchtype" can be one of "strategic", "merge" or "json" and they match the patch formats supported by kubectl. The default "patchtype" is "strategic". "extension" must be either "json" or "yaml". "suffix" is an optional string that can be used to determine which patches are applied first alpha-numerically. |
|
| --print-config | |
Specifies whether the configuration file that will be used in the upgrade should be printed or not. |
|
| -y, --yes | |
Perform the upgrade and do not prompt for confirmation (non-interactive mode). |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Show what differences would be applied to existing static pod manifests. See also: kubeadm upgrade apply --dry-run
Show what differences would be applied to existing static pod manifests. See also: kubeadm upgrade apply --dry-run
kubeadm upgrade diff [version] [flags]
| --config string | |
Path to a kubeadm configuration file. |
|
| -c, --context-lines int Default: 3 | |
How many lines of context in the diff |
|
| -h, --help | |
help for diff |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Upgrade commands for a node in the cluster
Upgrade commands for a node in the cluster
The "node" command executes the following phases:
preflight Run upgrade node pre-flight checks
control-plane Upgrade the control plane instance deployed on this node, if any
kubelet-config Upgrade the kubelet configuration for this node
kubeadm upgrade node [flags]
| --certificate-renewal Default: true | |
Perform the renewal of certificates used by component changed during upgrades. |
|
| --config string | |
Path to a kubeadm configuration file. |
|
| --dry-run | |
Do not change any state, just output the actions that would be performed. |
|
| --etcd-upgrade Default: true | |
Perform the upgrade of etcd. |
|
| -h, --help | |
help for node |
|
| --ignore-preflight-errors strings | |
A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| --patches string | |
Path to a directory that contains files named "target[suffix][+patchtype].extension". For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd", "kubeletconfiguration", "corednsdeployment". "patchtype" can be one of "strategic", "merge" or "json" and they match the patch formats supported by kubectl. The default "patchtype" is "strategic". "extension" must be either "json" or "yaml". "suffix" is an optional string that can be used to determine which patches are applied first alpha-numerically. |
|
| --skip-phases strings | |
List of phases to be skipped |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Use this command to invoke single phase of the node workflow
Use this command to invoke single phase of the node workflow
| -h, --help | |
help for phase |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Upgrade the control plane instance deployed on this node, if any
Upgrade the control plane instance deployed on this node, if any
kubeadm upgrade node phase control-plane [flags]
| --certificate-renewal Default: true | |
Perform the renewal of certificates used by component changed during upgrades. |
|
| --dry-run | |
Do not change any state, just output the actions that would be performed. |
|
| --etcd-upgrade Default: true | |
Perform the upgrade of etcd. |
|
| -h, --help | |
help for control-plane |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| --patches string | |
Path to a directory that contains files named "target[suffix][+patchtype].extension". For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd", "kubeletconfiguration", "corednsdeployment". "patchtype" can be one of "strategic", "merge" or "json" and they match the patch formats supported by kubectl. The default "patchtype" is "strategic". "extension" must be either "json" or "yaml". "suffix" is an optional string that can be used to determine which patches are applied first alpha-numerically. |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Upgrade the kubelet configuration for this node
Download the kubelet configuration from the kubelet-config ConfigMap stored in the cluster
kubeadm upgrade node phase kubelet-config [flags]
| --dry-run | |
Do not change any state, just output the actions that would be performed. |
|
| -h, --help | |
help for kubelet-config |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| --patches string | |
Path to a directory that contains files named "target[suffix][+patchtype].extension". For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd", "kubeletconfiguration", "corednsdeployment". "patchtype" can be one of "strategic", "merge" or "json" and they match the patch formats supported by kubectl. The default "patchtype" is "strategic". "extension" must be either "json" or "yaml". "suffix" is an optional string that can be used to determine which patches are applied first alpha-numerically. |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Run upgrade node pre-flight checks
Run pre-flight checks for kubeadm upgrade node.
kubeadm upgrade node phase preflight [flags]
| -h, --help | |
help for preflight |
|
| --ignore-preflight-errors strings | |
A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|
Check which versions are available to upgrade to and validate whether your current cluster is upgradeable.
Check which versions are available to upgrade to and validate whether your current cluster is upgradeable. This command can only run on the control plane nodes where the kubeconfig file "admin.conf" exists. To skip the internet check, pass in the optional [version] parameter.
kubeadm upgrade plan [version] [flags]
| --allow-experimental-upgrades | |
Show unstable versions of Kubernetes as an upgrade alternative and allow upgrading to an alpha/beta/release candidate versions of Kubernetes. |
|
| --allow-missing-template-keys Default: true | |
If true, ignore any errors in templates when a field or map key is missing in the template. Only applies to golang and jsonpath output formats. |
|
| --allow-release-candidate-upgrades | |
Show release candidate versions of Kubernetes as an upgrade alternative and allow upgrading to a release candidate versions of Kubernetes. |
|
| --config string | |
Path to a kubeadm configuration file. |
|
| -h, --help | |
help for plan |
|
| --ignore-preflight-errors strings | |
A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. |
|
| --kubeconfig string Default: "/etc/kubernetes/admin.conf" | |
The kubeconfig file to use when talking to the cluster. If the flag is not set, a set of standard locations can be searched for an existing kubeconfig file. |
|
| -o, --output string Default: "text" | |
Output format. One of: text|json|yaml|go-template|go-template-file|template|templatefile|jsonpath|jsonpath-as-json|jsonpath-file. |
|
| --print-config | |
Specifies whether the configuration file that will be used in the upgrade should be printed or not. |
|
| --show-managed-fields | |
If true, keep the managedFields when printing objects in JSON or YAML format. |
|
| --rootfs string | |
The path to the 'real' host root filesystem. This will cause kubeadm to chroot into the provided path. |
|